Outrageous Info About How To Build A Larsen Trap

I get the crimps from moncaster wire and the.

How to build a larsen trap. I'd been meaning to get on to this. Firstly you will need to aquire some timber either ready cut or if you are able to cut it yourself all the better. The original larsen trap, as invented by danish gamekeeper mr larsen, had a wooden frame with wire netting.

I don't like to kill anything unl. Firstly you will need to acquire some timber either ready cut or if you are able to cut it yourself, all the better. Next, you need to cut your timber to size;

The larsen trap contains a separate compartment for a ‘decoy’ bird, which is seen as an intruder in any corvid territory in which the trap is placed. I needed to build a new one as my old one had seen just about enough work over the years. Take 4 lengths at 28″ and then half lap them in the middle so they fit toghether as a cross.

Overall it makes a 30 x30 sized trap with it being 14 tall. An introduction to the larsen trap.larsen traps can be an effective method for controlling corvid pest species such as crows and magpies.basc is the largest. Magpies are voracious predators of songbird egg's and chicks as well as gamebirds.

How to build a larsen trap 1. Web site www.trapman.co.ukemail [email protected] 0044(0)1772811522 ask for the trapman larsen traps are used for catching members of the. Next you need to cut your timber to.

A workshop instruction sheet for this construction is available to download from the basc website: This traditional larsen trap was built from the plans in trap making step by step. How to build a larsen trap.